Note: TPU Wire 1.2mm variant will be stocked later this month. They did not ship out of WS in time.

Stabilizers areone of the most important part of any mechanical keyboard.A properly tuned stabilizer is the biggest change you’ll notice whenswitching to a custom mechanical keyboard from an off-the-shelf one found in big box stores.

Stabilizer design had remain unchanged for years, with various problems and difficulties that people just learned to cope with. Wuque Studio started designing stabilizers aiming to make them better and easier to tune.With WS Stabilizer V2, they fixed the common problem of the stabilizer wire popping out during removal of keyacps. This time they’re back with two innovativedesigns to minimize wire rattle!

Version 3

Version 3 tackles wire rattle in two ways, through two separatevariants.

The TPU version has a TPU wrap around the end parts of the wire. This added thickness makes the wire fit very snug into the stabilizer stems and thus minimizing rattle. The material is semi compressible which has dampening properties.

The silicone version comes with a standard wire but the stem has siliconehousing inside. This silicone is also semi-compressible making the standard wire fit very snug.

TPU version makes the wire thicker, silicone version makes the hole inside the stem smaller. Both approaches ensure a tighter wire fit that should make it far easier to tune stabilizers to perfection.

Features

• Prevents wire pop-outs with the housing-over-wire design
• Minimizes rattle by making sure the stabilizer wire fits snugly into stabilizer stems.
• PCB mounted
• Ribs inside the housing to prevent excess lube from sticking to the stem.

1.6mm

The 1.6mm version is for the traditional keyboard PCBsi.e. most of the keyboard PCBs made to date. Most other stabilizers in the market are also made for 1.6mm PCBs.

1.2mm

1.2 mm variants ones are not compatible with traditional 1.6mm PCBs, they’re made for the thinner PCBs made popular lately.

Each kit contains

• 10x stabilizer housings
• 10x stabilizer stems
• 4x 2u wires
• 1x 6.25u wire
• 1x 7u wire
• Stabilizer washers
• Copper screws
• NOTE: Only the silicone version comes with stabilizer shims