ROTORFLIGHT VANTAC RF007 FBL Helicopter Flight Controller

Specifications

Flight Controller Firmware: Rotorflight 2.x
Dimension: 43.531.213.7mm
Weight: 25.2g
Receiver Options:
– RF007 ARCHER+: Built-In 2.4G Archer Plus RS Receiver
– RF007 TWIN: Built-In Dual 2.4G TW R6 Receiver
– RF007 TANDEM: Built-In 2.4G&900M Dual-Band TD MX receiver
Operating Current (FC Only): 125mA@5V
Voltage Measurement Range via AIN (External device): 0-80V
RxUG Port: For Upgrading Internal RX Firmware (In case of OTA upgrade failure)
– Note: When powering this RxUG port, do not introduce additional power input from other ports to ensure the safe operation of the connected devices.
=====================================================================================
MCU: STM32F722RET6
Gyroscope (IMU): ICM-42688P
Barometer: SPL06-001
Blackbox Flash: 128MB
Servo Ports: Servo 1, Servo 2, Servo 3, Tail
ESC Ports: ESC (Throttle), RPM (Sensor), TLM (ESC Telemetry or other functions)
Other Ports: AUX and SBUS Out/In
Expansion Ports: Port A, C, and RxUG

Features

Runs Rotorflight 2.x Helicopter Control Software
Built-In FrSky FBUS-Capable Receiver (TW or AP Protocol)
Robust CNC Aluminum Case, Functional Heatsink for MCU
STM32F722 Microcontroller for Power and Flexibility
Precision Barometer, 3-Axis Gyroscope and 3-Axis Accelerometer
128MB Blackbox Function for Tuning/Troubleshooting
9 Primary Main Header Pins for Flexibility and Power Distribution

RF007 Manual Link