• Inputs J, K, T Thermocouple, Pt100 RTD
• PID or On/Off Control
• Auto-Tune or Manual PID Tuning
• Heating or Cooling Control Mode
• Two Outputs, SSR Pulse and Relay
• Ultra-Thin 35mm Depth
• Pluggable Terminal Block
• One Output Configurable for One of 7 Alarm Types
• IP65 Protection Rating
• Optional 12/24V Power

The N1030 is a powerful but compact temperature controller. Easy to install and configure, its compact 1/16 DIN size allows it to fit perfectly into most control panels including those where space is at a premium. It can work with a variety of temperature sensors and operate in either the ON/OFF or PID control mode. The N1030 temperature controller is ideal for optimizing processes, reducing oscillations and making the system more stable and efficient.

Two Outputs Configurable for Controlling or Alarming
The controller has two outputs that can be used for alarm or control. When set to control, the output can operate with PID or ON/OFF control. In the PID mode the PID parameters may be tuned manually or set to auto-tune. When configured as an alarm the output can trigger on high value, low value, deviation from set point or on sensor break.

Pluggable Terminal Connector
An innovative detachable terminal block makes wiring sensors and outputs fast and easy.

Extra Bright Display
Even with its small size the extra bright dual display allows for easy reading at a distance.

Compact Size and Remarkably Low Panel Depth
The N1030 has a compact 1/16 DIN size which allows it to fit into a panel with minimum available space. It also boasts a panel depth of only 35mm which is less than any other comparable controller on the market.

Suited For Industrial Environments
N1030 controller is ideally suited for industrial environments. With its IP65 rating it has guaranteed resistance to water jets and complete protection against dust. It also features password access as a means of protecting the configuration parameters, not allowing modifications to the parameters values and avoiding tampering or improper manipulation.

N1030T Version with Two Independent Timers
The N1030T is a version of the N1030 with two independent timers.
The timers can be associated with any output of the controller. The output associated with a timer turns on during the timing period. The timers may be set to start timing either when the setpoint is reached or when a key is pressed on the controller front panel. The timers may be set for up or down counting and have a time base in minutes or seconds allowing them to be programmed for up to 99:59 mm