Free shipping on orders over $15

Shopping Cart

  • No products in the cart.

MicoAir743v2-AIO-35A H743 AIO Flight Controller with 35A Bluejay ESC

$67.55 $33.78

  • Shipping Icon
    Free
    Shipping
  • Shipping Icon
    Safe
    Payment
  • Shipping Icon
    Best
    Services
Categories :
  • Lighting & Studio
  • MicoAir743v2-AIO-35A: H743 flight control and Bluejay ESCs

    Want an H743 flight controller without finding room for a separate ESC board? The MicoAir743v2-AIO-35A puts the controller and four 35A Bluejay ESC channels on one 36 36mm board. Its 25.5 25.5mm mounting pattern, dual IMUs and microSD slot give compact builds room for more than just the essentials.

    Key Highlights

    • One board instead of a stack: Integrated four-channel ESC hardware reduces the number of boards you need to mount.
    • H743 processing: The STM32H743 runs at 480MHz with 2MB flash, alongside BMI088 and BMI270 IMUs and an SPL06 barometer.
    • Room for peripherals: Seven UARTs and an I2C interface provide connections for your receiver, GPS and external sensors.
    • Bluejay motor control: Four 35A continuous ESC channels support DShot300/600. That current rating requires good cooling, not wishful thinking.
    • Separate accessory supplies: Onboard 5V/2A and 12V/2A BEC outputs serve peripherals with the matching voltage requirements.

    Why You Want It

    This AIO suits a build where board space matters but you still want connections for GPS, telemetry and other peripherals. MicoAir documents support for ArduPilot, PX4, Skybrush, INAV and Betaflight; choose and configure the appropriate firmware for your aircraft rather than treating the board as ready to fly out of the packet. The microSD slot gives you somewhere to put flight logs, while USB-C keeps the bench connection familiar. There is no onboard compass, so a build that needs one must use a suitable external I2C compass.

    Specifications

    • Model: MicoAir743v2-AIO-35A
    • Processor: STM32H743, 480MHz, 2MB flash
    • IMUs: BMI088 + BMI270
    • Barometer: SPL06
    • Battery: 26S LiPo
    • Integrated ESC: Four channels, 35A continuous per channel with good cooling
    • ESC firmware: Bluejay; manufacturer specification lists version 0.19.2 and 48kHz PWM
    • ESC protocols: DShot300 and DShot600; bidirectional DShot support depends on flight firmware
    • Connections: Seven UARTs, I2C, SWD, USB-C, beeper and LED-strip connections
    • Logging: MicroSD/TF card slot
    • Monitoring: Battery voltage and current
    • BEC outputs: 5V/2A and 12V/2A
    • Digital VTX connection: SH1.0 six-pin connector; pin 1 supplies 12V
    • Mounting: 25.5 25.5mm, 3mm holes
    • Board dimensions: 36 36 8mm
    • Board weight: 10g, as specified by MicoAir

    FAQ

    Does it have a built-in compass?

    Add a Review

    Your email address will not be published. Required fields are marked *