The Marlowe leather camera strap is hand made in Western Australia a nod to the classic camera straps of the film era, built with materials that get better with use.

Made from 2mm full grain Buttero vegetable tanned leather sourced from the Conceria Walpier tannery in Tuscany, Italy. Soft and pliable straight from the box each strap is hand conditioned with leather balm before it leaves the workshop, giving the Buttero an immediate suppleness that will deepen further with wear.

The hardware is solid brass throughout brass rivets and brass split rings. Solid brass develops a warm, lived-in patina over time that complements the dark brown Buttero beautifully.

The 30mm Buttero neck pad is attached with brass rivets and spreads the load across the neck for a more comfortable carry particularly on longer shooting days. The straps are 13mm wide x 2mm thick keeping the overall look slim and uncluttered and best suited to compact cameras. The design is intentionally minimal the brass does the talking.

Suitability

The Marlowe suits film cameras, mirrorless cameras, and rangefinders equally well. It’s a particularly natural companion for vintage and classic camera bodies. The brass split rings used on the Marlowe strap are a little thicker than the stainless steel split rings found on our other straps. We recommend fitting to cameras with a minimum lug hole diameter of 3mm.

Specs

• 2mm full grain Buttero vegetable tanned leather, Conceria Walpier, Tuscany
• Dark brown
• 13mm strap width
• 30mm Buttero leather neck pad, attached with brass rivets
• Solid brass split rings
• Hand conditioned with leather balm before dispatch
• Available in 95cm and 110cm (measured split ring to split ring)

Length guide

The 95cm is a classic neck strap length camera sits comfortably at chest level. The 110cm works as either a neck strap or crossbody carry, giving you more flexibility depending on what you’re wearing. Not sure? Visit our strap info page.

Aging beautifully

The Marlowe is designed to age. The dark brown Buttero will develop a deep patina with use softening in the areas that flex most and holding its structure where it matters. The brass rivets will darken overall with polished highlights in wear areas. With regular use the Marlowe will soon look like a vintage classic.

Care

The strap arrives pre-conditioned with leather balm. No immediate care needed. If the leather starts to feel dry apply a small amount of leather balm or quality leather conditioner to maintain suppleness and encourage even patina development. Wipe brass hardware with a dry cloth do n