Free shipping on orders over $15

Shopping Cart

  • No products in the cart.

KNX Heating Actuator Basic, 6-gang

$209.60 $104.80

  • Shipping Icon
    Free
    Shipping
  • Shipping Icon
    Safe
    Payment
  • Shipping Icon
    Best
    Services

Heating actuator for switching electrothermic servos for heating or cooling ceilings.Servos can be activated with rated voltage 24V or 230V.

Features

  • Heating actuator for switching thermal servos for heating or cooling ceilings.
  • Control using 1-bit or 1-byte corrected variable telegrams.
  • For 1-byte correcting variables, the outputs are controlled by pulse width modulation (PWM).
  • Servos with the characteristic “de-energised open” or “de-energised closed” can be controlled.
  • Servos can be activated with rated voltage 24V or 230V.
  • Overload protected, short-circuit protected.
  • Standard protection.
  • Feedback via bus e.g. for overload and short circuit.
  • Switching the heating circuit pump (standard functions).
  • Passive group feedback of the closed servos.

Technical data

  • KNX medium: TP256
  • Outputs: 6
  • Contact type: Triac
  • Power loss: max. 1W
  • Switching voltage: AC24/230V, 50/60Hz
  • Switching current: 5 to 160mA
  • Switch-on current: max. 1.5A (2s)
  • Number of drives per output
    • AC230V drives: 4
    • AC24V drives: 2
  • Connections: max. 4mm

Notes

  • Valves with the same operating voltage must be connected at all outputs.
  • VDE approval in accordance with EN 60669-1, EN 60669-2-1.
  • Installation on DIN top-hat rail.

Dimensions

Modular widths (MW): 4
Add a Review

Your email address will not be published. Required fields are marked *