Free shipping on orders over $15

Shopping Cart

  • No products in the cart.

HDZero Gamma 45A HD-Ready AIO (25.525.5mm for 2.54in Digital Builds)

$92.07 $46.04

  • Shipping Icon
    Free
    Shipping
  • Shipping Icon
    Safe
    Payment
  • Shipping Icon
    Best
    Services
Categories :
  • Lighting & Studio
  • The HDZero Gamma is a Digital-Ready HD AIO built on the STM32G473 MCU, using the 25.5×25.5mm Whoop/Toothpick pattern and optimized for 2.54 inch drones. An integrated serial 2.4GHz ExpressLRS receiver eliminates the need for a separate RX, reducing soldering, saving space, and making builds cleaner and easier.

    Designed specifically for digital video systems, the Gamma includes a standard digital VTX plug and a protected 8V/3A high-power BEC to reliably support modern digital transmitters. A secondary 5V/3A rail powers LEDs, cameras, and other peripherals.

    The onboard 32-bit 4-in-1 AM32 ESC delivers clean, stable power to the MCU and absorbs voltage spikes during rapid throttle changes, reducing the risk of brownouts, MOSFET failures, and motor damage. Each motor output supports 45A continuous with 60A bursts, providing ample performance for high-powered micro builds.

    Purpose-built for digital FPV and drone soccer, the Gamma removes the analog OSD chip to save space and pairs ideally with the HDZero Whoop V2 VTX for a compact, low-profile digital stack.

    Complete the video system with theHDZero FPV Goggles 2for responsive, ultra-low-latency digital video.

    Specifications.
    Model HDZero Gamma AIO Flight Controller
    Flight Controller
    CPU STM32G473 (170MHz)
    Gyro ICM42688
    Block Box No
    I2C Pads Yes
    UART Pads TX1/RX1, TX3/RX3, TX4/RX4
    ESC Telemetry RX4
    VTX MSP UART TX1/RX1
    Buzzer Pads Yes
    LED Strip Control Yes
    USB Type-C
    Analog OSD No
    FC Firmware Betaflight: HDZERO_GAMMA


    ESC

    CPU AT32F421 (120MHz)
    Telemetry Supported
    Input signal DSHOT 150/300/600, MultiShot, OneShot
    Max Current 45Ax4 (Continuous) / 60Ax4 (Burst)
    Current Sensor Scale = 107, offset = 0
    ESC Firmware AM32 2.18
    Target: AM32_HDZERO_HALO_F421_2.18.hex

    ELRS Receiver

    • Chip Set ESP32 + SX1280
    • FC UART TX2/RX2
    • RF Frequency 2.4GHz
    • Max TX RF Power 10mW
    • Antenna Interface 1x U.FL
    • ELRS Firmware HDZero 2.4GHz | HDZero 2.4GHz AIO RX

    BEC

    • 5V 3A for LED strips and other peripherals
    • 8V 3A for digital video transmitter

    Dimensions

    • Power Supply 3S ~ 6S
    • Size 33x33mm with 25.5×25.5 M2 mounting holes
    Add a Review

    Your email address will not be published. Required fields are marked *