Features

1. Use mainstream STM32F405 chip
2. Equipped with the latest 42688-P gyroscope
3. 16M black box storage
4. Integrated LC filter
5. Upgrade type-C USB interface
6. Directly plugged into the DJI Air Unit
7. With TAKER H65_8S_BLS 65A 4IN1 ESC, the flying feel is silky
8. Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
9. [email protected]+ 5V@3A dual independent BEC

Specifications

GEP-F405-HD V3 Flight Controller

• MCUSTM32F405
• IMUICM42688-P(SPI)
• Air Unit ConnectionDirect plugging into DJI Air Unit
• Black Box16M onboard
• Barometer: support
• Motor outputsM1-M6
• USB InterfaceType-C
• OSDBetaFlight OSD w/ AT7456E chip
• BEC5V@3A,[email protected]dual BEC
• Firmware TargetGEPRCF405
• Size37.1537.15mm
• Mounting: 30.530.5mm4mm hole becomes 3mm after using a silicone shock-absorbing circle
• Input Voltage3-6S LiPo
• UART6 UARTs
• Power FilterIntegrated LC filter
• Weight7.3g

TAKER H65_8S_BLS 65A 4IN1 ESC

• Input Voltage: 3-8S Lipo
• Ammeter: Support
• Continue Current65A
• Burst Current70A5 second
• Support Protocol: Dshot 150/300/600
• Size4245.7mmhole30.530.5mm4mm hole becomes 3mm after using the silicone shock-absorbing ring.
• Weight: 14.9g
• Target: B_X_30

Includes

1 x Flight Controller

1 x ESC

1 x Capacitor

1 x DJI Air Unit Adapter Cable

1 x Flight Controller Adapter Cable

1 x XT60 Power cable

4 x M3*30 Screws

4 x M3*25 Screws

8 x Nylon nuts

8 x Silicone grommets

2 x sh1.0 4pin silicone cable

1 x Camera connection cable